WHICH ELECTRIC TILE CUTTER WITH AUTO FEED TO CHOOSE?
If a manual tile cutter cannot cope with tiles!
If the master wants to cut tiles without the need for (or minimal) additional processing!
If the master wants to get a universal tool for 1) cutting tiles, partial cutting of tiles (undercutting). 2) for diagonal cutting (a very difficult task for a manual tile cutter 3) for removing a chamfer (bevel); 4) for cutting a convex chamfer; 5) for cutting grooves for stairs!

The master begins to look at electric tile cutters with small discs and automatic carriage feed. Automatic feed of small discs ensures a clean cut, so we don’t even look at manual electric tile cutters with small discs.
Let’s talk about the pros and cons of the most common tile cutters. Let’s start from the cheapest to the most expensive:

Electric tile cutter GTM ST1201A (Caowang, SHIJING 9202-1200) – 44,000 UAH
Pros:
-price;
-lightweight;
-reliable;
-does its job;
-best warranty.
Cons:
-may require leveling the table and additional silicone coating of the bath;
-red laser;
-the pump is short-lived and requires suction of clean water;
-the rigidity of the carriage is sufficient for a straight cut, but for a chamfer (45) you need to use specialized discs.

Electric tile cutter SHIJING SJ-ZD 9231 1200 46,000 UAH
Pros:
-price;
-lightweight;
-green bright laser;
-does its job;
Cons:
-complicated adjustment of the angle of attack;
-unprotected carriage from dirt;
-the pump is short-lived and requires suction of clean water;
-short-lived tire, requires constant maintenance.

Electric tile cutter BIHUI 1200 with automation (TCSA1200) – 57800 UAH
Pros:
-the toughest carriage for twisting among all tile cutters;
-130 mm disc allows you to cut 30 mm;
-power 3000 W
-reliable;
-does its job;
-green bright laser;
-warranty.
Cons:
-heavy;
-the most noise;
-the pump requires suction of clean water;
– sometimes there are small issues with the geometry of the table that are resolved.

Electric tile cutter SHIJING 9201C-1200 – 59900 UAH
Pros:
-brushless powerful motor;
-green bright laser;
-does its job.
Cons:
-heavy;
-the pump is short-lived and requires suction of clean water;
-the rigidity of the carriage is sufficient for a straight cut, but for a chamfer (45) you need to use specialized discs.

Electric tile cutter SHIJING SJ-ZD 9033 1200 – 68000 UAH
Pros:
-powerful motor;
-simple;
-simple, reliable, control;
-belt drive;
-does its job;
-green bright laser;
-warranty.
Cons:
-heavy;
-belt drive;
-the pump is short-lived and requires suction of clean water;
-the carriage is not fully protected from dirt and requires maintenance.

Electric tile cutter SHIJING 9201A-1200 – 72500 UAH
Pros:
-brushless powerful motor;
– the only one that uses a 200 mm disc;
-200 mm disc allows you to cut 50 mm;
– the quietest of all;
– a large number of control options;
– belt drive;
– does its job;
– bright green laser;
– powerful pump with adjustment;
– warranty
Cons:
– heavy;
– belt drive;
– the rigidity of the carriage is sufficient for a straight cut, but for a chamfer (45) you need to use specialized discs.

Electric tile cutter Wandeli QX ZD-1200 – 79500 UAH
Pros:
– reliable tested design;
– a large number of control options;
– does its job 100%;
– aesthetically the best;
– rigid carriage for twisting;
– lightweight;
– updated control boards to increase reliability;
– bright green laser;
– warranty
Cons:
– unstable;
– the pump requires suction of clean water;
– expensive.