Construction vacuum cleaner Starmix iPulse L-1635 TOP + case + 2 filters

Construction vacuum cleaner Starmix iPulse L-1635 TOP (018621). The vacuum cleaner is designed to collect construction dust. The vacuum cleaner has a high engine power, vacuuming 280 kW, air flow rate 75 l/s. It is possible to use fleece bags for collecting garbage or reusable ones. The STARMIX IPULSE L-1635 vacuum cleaner in the TOP version is equipped with fasteners for installing a tool box, as well as a tank handle, which significantly facilitates moving the vacuum cleaner across the surface. The socket installed on the vacuum cleaner body allows it to be used in conjunction with power tools with a power of up to 2 kW.

The vacuum cleaner has a cleaning class of “L”, equipped with a fully automatic cleaning system, which allows it to be used without bags even when working in the most difficult conditions. The large tank holds 25 liters of dry dirt or 22 liters of liquid.

Advantages of Starmix iPulse L-1635 TOP:

Housing made of impact-resistant plastic with a removable top and a hinged lid for replacing filters.
Two polyester cassette filters with a total filtration area of ​​8600 cm2 retain dust up to 99.99%.
The electromagnetic system of pulsed vibration cleaning of the Permanent Clean filters is constantly involved in the work and ensures the cleaning of each of the cassette filters as it becomes dirty. This ensures continuous operation without loss of suction power.
The intelligent iPulse control system is able to recognize the cause of the drop in productivity and turn on the vibration cleaning in a timely manner only if the cause is clogged filters.
Socket for connecting a tool (2000 W) with an automatic on/off system.
Suction power adjustment.
The control wheel is located on the front panel of the vacuum cleaner.
Filter contamination sensor (the light comes on when the filter is clogged).
Soft start and energy safety of the switching system.
Inertial automation for complete cleaning of the suction hose after switching off.
Water level sensor with automatic shutdown.
Antistatic protection.
Holder for winding the suction hose and power cord and compartment for nozzles.

Filter concept:

Optimal arrangement of filters parallel to the motor axis provides a large usable volume of the dust container
Filtering surface 2×4300 cm2
Very robust design and long filter life
Optimal filter material with a dust retention rate of up to 99.997% certified for dust class “M”
Filters are maximally protected from possible damage
High dust retention rate
Excellent vacuum cleaner performance
System economy due to high filter life
User protection from harmful dust

Permanent Clean:

New patented filter cleaning technology during suction!
Each of the two filters is isolated from the air flow during suction and is cleaned alternately without loss of power thanks to the proven electromagnetic pulse filter cleaning technology.
Continuous, adjustable as needed, filter cleaning without loss of power
Cleaning using electromagnetic pulses (unsurpassed efficiency)
Highest productivity due to the elimination of forced pauses in work
Saving time and money
Always clean filters

Power tool socket

Power tool socket with automatic switch-on
For connecting power tools up to 2 kW.
The vacuum cleaner automatically switches on and off simultaneously with the power tool connected to it.
Ease of use
Other electrical appliances can be connected (radio, lamps, etc.)

Electronics

Electronic start/stop
The microprocessor controls the smooth start and stop of the vacuum cleaner. The starting current is reduced to protect the motor and fuses. When switched off, the remaining dust in the hose is fully sucked up.
Water level sensor with electronic sensor switch-off. As soon as the water reaches the maximum level, the vacuum cleaner automatically switches off.
Digital sensor constantly monitors the level of filter contamination
Ability to track the amount of time worked

Equipment:

Socket for connecting pneumatic and electric tools (built into the vacuum cleaner body)
Rails for installing a tool box (installed)
Two large wheels at the back and two guide rollers (one of them with a parking brake) (installed)
FKP 4300 polyester cassette filter, 2 pcs., filtration area 2×4300 cm2. (installed)
Class “M” filter bag for collecting dry dust – 1 pc.

TOP equipment:

Flexible suction hose, length 5 m (art. 413235) – 1 pc.
Stainless steel connecting elbow, with a hole for adjusting the air flow (art. 421445) – 1 pc.
Metal extension tubes, length 50 cm. (art. 424842) – 2pcs
Universal plastic nozzle with bristles, working width 370 mm (art. 414706) – 1pc
Crevice nozzle, length 22 cm (art. 417011) – 1pc
Adapter nozzle for connecting the suction hose to the power tool, length 23 cm (art. 425719) – 1pc
Metal tank handle
Case
2 additional filters

Characteristics:
Nominal. power (max.), Watt 1600
Productivity (max.) measured at the motor cover, l/s 75
Productivity (max.) measured at the end of the hose, l/s 45
Vacuum (max.) measured at the motor cover, mbar 280
Vacuum (max.) measured at the end of the hose, mbar 245
Container volume (max.) gross dust-water, l 35/25/22 plastic
Noise level, dBA 69
Dimensions LxWxH (including handle for moving) 53 x 40 x 92*
Weight, kg 16.8
Power cord length, m 8 (rubber, H05RR-F), red
Radius of action, m 13.0 – 14.0
Complete set
Main filter FKP 4300 (polyester)
Fleece filter bag, class M x 1 pc. FBV 23-35
Special “PE” filter bag, class H/Na net
EWA accessory set art. no. 072401
Equipment
Electromagnetic vibration filter cleaning yes – during iPulse operation
4-point tool box attachment yes
Speed ​​selector yes, smooth
Tool socket yes
Filter indicator light yes
Carrying handle yes
Carrying handle with power cord holder/flexible hose attachment – plug fixation yes/yes (1 pc. Velcro)

Made in Germany

Скачать руководство в формате PDF Полезная информация